Economic Portable Intelligent Pallet Jacks Battery Charger ESCH
24V/30A CE Certification
| Type | Smart Battery Charger High frequency |
| Model | ESCH 24V/30A |
| Application | Electric pallet jacks, pallet walkies, cleaning sweeper |
| Battery parameter | 24V 174-240Ah |
Introduction:
ESCH series automatic chargers for warehouse equipment and electric
forklift provide a superior level of on-board and off-board
reliability and charge quality. ESCH series chargers with UL and CE
certification are tested to provide a long service life in
difficult environments and provide charge quality for lead-acid or
lithium-ion batteries.
Application:
| Machine category | Forklifts | Pallet walkies | Pallet jacks |
| Application description | heavy materials loaders and movers in warehouses, shipping depots,
etc. | Light-duty material handling applications | Light-duty material handling applications in larger facilities.
Larger battery pack capacity and lifting capability. |
| Battery pack voltage | 24v/36v/48v/80v | 12v/24v | 24v |
| Battery pack capacity | 200-800Ah | 50-250Ah | 225-800Ah |
Installation for the charger
1. Conditions for installation
The charger must be placed in a dry room with good ventilation. To
keep all the venting holes on the charger clean for avoiding
overheating. There is no corrosive and acidic gas near the charger
to avoid corrosion for the charger.
The charger should place on the ground for operation.
2. Connection to the power supply
To connect to the power supply according to the requirements
stipulated in the nameplate or operating instruction
Single-phase AC220V three cables (one for L, one for N; one for PE)
To connect the input cables of the charger to L, N, and PE of the
power supply according to the marks. The connection to the power
supply must be done by the electrical engineer according to the
local standards. Otherwise, the case of the charger must be
grounded.
3. Connection to the battery
Connecting the positive “+” and negative “-” of the battery with
the positive “+” and negative “-” of the charger’s output
respectively.
Product Features:
- Overcurrent limit
- Output short circuit protection
- Reverse protection
- Temperature protection
- Automatic shutdown when the battery is full
- Equipment lockout while charging
- The LED indicates the charging process
- Temperature compensation
- Overvoltage protection
- Active PFC and softstart
- BMS systems for Lithium batteries
- Customize charge profiles
