72 Volt Traction Forklift Battery Watering System With 60L Water
Tank
AWS-36 For 72v 36cells Forklift / Golf / Traction Battery
| Type | Auto Watering System |
| Application | Traction Battery |
| Model | AWS-36 |
| Battery model | 72v 36cells |
Porduct Description:
During the period of development and long-term practical usage, the
leak tightness of MYING automatic watering system has received
complete recognition.
To make your new or existing forklift battery virtually maintenance
free,
we recommend installing an automatic battery watering system and water level
indicator.
Poruct Component:
Automatic Battery Watering Systems is composed of Waterfilling
plug,T-piece,Flow indicator,Composite connector,Plastic pipes.
Suitable for battery pack: 12V,24V,36V,48V
Automatic waterfilling plug is connected with a T-piece which is
easy to be installed and can be rotate,Then a T-piece is connected
to the water plastic pipe.There is a lens which can see the top
water level indicator at the top of waterfilling plug,When the
water level is reached, the flow indicator is closed and the
injection is finished.
When the top cover of the automatic watering system is inclined to
open, the temperature of the electrolyte can be measured.
| Model | Watering Head (T-piece) | Flow indicator (filter) | 6mm Watering pipe | 10mm Watering pipe | End Plug | Female/Male K10 | Water Tank |
| AWS-12 (24v) | 12pcs | 1pc | 3m | 10m | 2pcs | 1pc | 30L 1pc |
| AWS-18 (36v) | 18pcs | 1pc | 4m | 10m | 2pcs | 1pc | 30L 1pc |
| AWS-24 (48v) | 24pcs | 1pc | 5m | 10m | 2pcs | 1pc | 30L 1pc |
| AWS-36 (72v) | 36pcs | 1pc | 8m | 10m | 2pcs | 1pc | 60L 1pc |
| AWS-40 (80v) | 40pcs | 1pc | 10m | 10m | 2pcs | 1pc | 60L 1pc |
Characteristics of the Automatic watering system:
1. No need to water by hand, labor saving,
2. No malfunction factor leading to damage the battery.
3. Easy and safe operation.
4. Ensure a precise electrolyte level in every battery cell.
5. Prevent leakage when watering.
6. Effectively avoid the acid liquid to erode the storage battery.
7. Extend the service life of the battery.
8. Environment protection.
FAQ
Q: How to properly install the automatic watering system?
A: Our automatic wateringsystem is easy to operate, noneed to
finish watering the electrolyte in the storage battery by hand,
time saving and labor saving, besides, it canextend the service
life.
Q: How to choose proper floaters?
A: According to different storage battery,we have five kinds of
floaters for you to choose.In order to achieve our expectedstandard
and completely reflect the effectiveness of the automatic watering
system, the most important thing is to choose proper floaters.
Q: What to care during the filling process?
A:
1．Inordertoensureasafewateringprocess,weherebyrecommendyoutouseflowindicator(withfilter),
theflowindicator withfilter can not only timely indicate whether it
finishes watering, but also avoid unclean impurities entering the
battery to result interruption.
2．The watering pressure should be within the range of 0.2-0.6, no
less than200mbar.
3．You’d better conduct watering within the specified periods,
because frequent filling will lead to overflowing for too much
water, which will do great damage to the storage battery.
Note:Filling after finishingcharging is the bestideal state,
besides, do not filling before charging.
Meanwhile we will offer detailed installation drawings to ensure
that the clients can correctly install and standardize the
operation.
